data sheet part number 856064 140 mhz saw filter subject to change or obsolescence without notice rev c 03/08 ? triquint semiconductor page 1 of 5 features for if applications typical 3db bandwidth of 2 mhz high attenuation single-ended operation ceramic surface mount package (smp) replaces sawtek p/n 851905 (bw 3db = 2.0mhz) hermetic rohs compliant (2002/95/ec), pb -free package pin configuration surface mount 19.00 x 6.50 x 1.75 mm bottom view smp-75b 10 9 8 7 6 5 4 3 2 1 single - ended configuration pin no. description 10 rf input 5 rf output 1,6 ground 2,3,4 case ground 7,8 ,9 case ground r0.51 1.91 2.31 1.02 1.80 0.76 19.0 6.50 1.75 nom. 1.96 max. dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width +0.15mm/-0.10mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0m, over a 2 C 6m ni plating pb
data sheet part number 856064 140 mhz saw filter subject to change or obsolescence without notice rev c 03/08 ? triquint semiconductor page 2 of 5 electrical specifications (1) operating temperature range: (2) 0 to +70 c parameter (3) minimum typical (4) maximum unit center frequency - 140 - mhz minimum insertion loss - 21.50 22.186 db lower 1 db band edge (5) upper 1 db band edge (5) - 140.845 139.06 140.94 139.155 - mhz mhz lower 3 db band edge (5) upper 3 db band edge (5) - 141.022 138.91 141.09 138.978 - mhz mhz lower 40 db band edge (5) upper 40 db band edge (5) 138.272 - 138.31 141.67 - 141.726 mhz mhz amplitude variation 139.15 C 140.85 mhz - 0.5 1.0 db p-p phase linearity 139.15 C 140.85 mhz - 1.8 3.5 o p-p group delay variation 139.15 C 140.85 mhz - 85 180 ns p-p relative attenuation (5) 15 C 136 mhz 144 C 220 mhz 220 C 230 mhz 230 C 250 mhz 250 C 260 mhz 260 C 350 mhz 60 45 38 45 26 45 64 56 46 65 31 65 - - - - - - db db db db db db source impedance (single-ended) (6) load impedance (single-ended) (6) - - 50 50 - - substrate material - quartz - - notes : 1. all specifications are based on the triquint tes t circuit shown below 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measurements at room temperature 5. relative to minimum insertion loss 6. this is the optimum impedance in order to achiev e the performance shown test circuit: actual matching values may vary due to pcb layout a nd parasitics 50 w single-ended input 1,2,3,4 6,7,8,9 50 w ww w 47nh 18pf 10 5 110nh 50 w ww w 50 w single-ended output
data sheet part number 856064 140 mhz saw filter subject to change or obsolescence without notice rev c 03/08 ? triquint semiconductor page 3 of 5 typical performance (at room temperature)
data sheet part number 856064 140 mhz saw filter subject to change or obsolescence without notice rev c 03/08 ? triquint semiconductor page 4 of 5 matching schematics actual matching values may vary due to pcb layout a nd parasitics 50 w single-ended input 1,2,3,4 6,7,8,9 50 w ww w 47nh 18pf 10 5 110nh 50 w ww w 50 w single-ended output marking pcb footprint xxxxxx 856064 sawtek date code id dot 2.51 6.70 8.86 .69 1.22 2.00 the date code consists of: day of the current year (julian, 3 digits), last digit of the year (1 digit) and hou r (2 digits) this footprint represents a recommendation only dimensions shown are nominal in millimeters tape and reel ?1.5 12.0 2.3 4.0 0.3 2.0 0.20 section a-a 7.1 19.6 r0.75 1.75 ?1.5 14.2 28.4 32.0 a a id dot direction of travel ?330 ?102 2.7 ?13.0 ?20.2 2.0 32.8 dimensions shown are nominal in millimeters packaging quantity: 2000 units/reel
data sheet part number 856064 140 mhz saw filter subject to change or obsolescence without notice rev c 03/08 ? triquint semiconductor page 5 of 5 maximum ratings parameter symbol minimum maximum unit operating temperature range t 0 +70 o c storage temperature range t stg -40 +85 o c important notes warnings electrostatic sensitive device (esd) avoid ultrasonic exposure rohs compliance this product complies with eu directive 2002/95/ec (rohs) solderability compatible with jesd22-b102, pb-free process, 260c peak reflow temperature ( see soldering profile ) links to additional technical information pcb layout tips qualification flowchart soldering profile s-parameters rohs information other technical information triquints liability is limited only to the surface acoustic wave (saw) component(s) described in this data sheet. triquint does not accept any liabilit y for applications, processes, circuits or assemblies , which are implemented using any triquint componen t described in this data sheet. contact information po box 609501 orlando, fl 32860-9501 usa phone: +1 (407) 886-8860 fax: +1 (407) 886-7061 email: info-product@tqs.com web: www.triquint.com or contact one of our worldwide network of sales offices, representatives or distributors pb
|
